GLR43304240, 4 Channel Gigalink™ Series 433MHz Receiver
This Gigalink™ receiver can be connected direcly to the mains supply, 240VAC. It has four relay outputs that can switch currents up to 8 Amps each. There is an on-board switch to test each relay and a LED to indicate when the relay is “On”. The receiver has a power “On” LED to indicate that the correct supply voltage is connected.
The receiver’s micro-controller can store unlimited number of transmitters with a high security level using the encrypted 32-bit digital code. Included with the receiver is the Gigalink™ programming cable.
- Four channel receiver with relay outputs
- Over 4 billion code combinations
- Highly sensitive receiver input stage
- Crystal controlled for high reliability
- Can store unlimited number of transmitters
- E version available withC1020 case
- Momentary, Latching and Security Latching output modes can be selected by the user
- Built in test switch to activate relays
- Optional QM100 bracket available for easy mounting to cases or wall
- Supply Voltage: 240 VAC Mains
- Current Consumption: 2.2mA standby
- Receiving Frequency: 433.920MHz (other frequencies available on request)
- Sensitivity: Better than 1µV (for relay output to switch on)
- Relay Output: Four change over relay outputs, rated at 8 Amps / 240VAC
- Antenna: Elsema ANT 433MHz series
- Dimensions: 160 x 70 x 30mm
- Useable Transmitters: All Elsema type GLT433series
- Ideal for Industrial Automation, eg Crane Control, winches, wireless cement truck operation.
Ordering Information:
| Part Number | Description | Part Number | Description |
|---|---|---|---|
| GLR43304240 | Receiver with 4 Relay Outputs. | GLR43304240E | 4-Channel Receiver Enclosed in a Case. |
